Knauf Insulation

Knauf Insulation

100mm Knauf DriTherm Cavity Slab 34

Earthwool DriTherm 34 Ultimate Cavity Slabs have a special additive to make the product water-repellent for thermal insulation in residential and non-residential masonry cavity external walls. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green Guide BBA - 95/3212 ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with

Knauf Insulation

140mm Knauf FrameTherm® Slab 32 (Pack of 4)

FrameTherm Slabs 32 is a specialist product for timber frame construction. Earthwool FrameTherm slabs are used for ‘friction fitting’ between timber studs and rafters. Slabs are manufactured with a width of 570mm to suit studs spaced at 600mm centres. FrameTherm Slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Acoustic Roll

Designed specifically for sound insulation of residential building elements such as Robust Detail walls and floors, separating floors and walls, internal floors and walls as well as commercial metal stud partitions where compliance with acoustic regulations is required. Knauf Acoustic Rolls are 1200mm wide and ready-cut to produce four, 600mm wide rolls (double wound) and manufactured to a minimum density of 10Kg/m3. Application: - Friction fit between  joists and studs at 400mm and 600mm- Separating Walls and floors- Internal walls and floors- Timber and metal stud partitions Certification: EUROCLASS A1 to BS EN 13501-1ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf DriTherm Cavity Slab 32

For thermal insulation in residential and non-residential masonry cavity external walls, Earthwool DriTherm 32 Ultimate Cavity Slabs have a special additive to make the product water repellent. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green GuideBBA - 95/3212ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance with

Knauf Insulation

Knauf DriTherm Cavity Slab 37

For thermal insulation in residential and non-residential masonry cavity external walls, Earthwool DriTherm Cavity Slabs have a special additive to make the product water repellent. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green Guide BBA - 95/3212 ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with

Knauf Insulation

Knauf FrameTherm® Roll 32

  FrameTherm Roll 32 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 35

FrameTherm Roll 35 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 3x380mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 40

FrameTherm Roll 40 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. Earthwool FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 40 (Combi-Cut)

Knauf Loft Roll 40 provides a superior performance with a thermal conductivity of 0.040 W/mK. Available with partially cut perforations, Combi-cut has the flexibility to be used between joists at either 400mm or 600mm centres or used unsplit as a full-width roll. Knauf Loft Roll 40 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria Application: Knauf Loft Roll 40 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 44 (Combi-Cut)

Knauf Loft Roll 44 is available in a range of thicknesses with a thermal conductivity of 0.044 W/mK. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres, or used unsplit as a full-width roll. Ready-cut products are fully cut and are designed to be used between joists at 600mm centres. Knauf Loft Roll 44 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool Loft Roll 44 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Omnifit Slab 35 (600mm wide)

Knauf OmniFit Slab 35 is an alternative to existing flexible slabs and has a high level of thermal performance. OmniFit Slab is available in both 600mm and 400mm wide options to suit use between timber or metal studs at either 600mm or 400mm centres. OmniFit Slab is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool OmniFit Slab is typically used for the thermal and acoustic insulation of a wide variety of constructions such as timber and metal stud partitions, timber frame walls, between rafters and timber floors. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with A+ rating on BRE Green Guide [[end app]]

Knauf Insulation

Knauf Rocksilk Flexible Slab

Rocksilk Flexible Slab is a Rock Mineral Wool slab, designed for use in multiple thermal and acoustic applications as well as the fire protection of a loft conversion floor.It is non-combustible with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Application:- Rocksilk® Flexible Slab is typically used for the thermal and acoustic insulation of a wide variety of constructions such as timber and metal stud partitions, timber frame walls and suspended timber floors. Rocksilk® Flexible Slab has been tested to provide 60 minutes fire protection when a loft is upgraded into habitable accommodation. Certification:- Rocksilk® Flexible Slab is manufactured in accordance with BS EN 13162, ISO 50001 Energy Management Systems, ISO 14001 Environmental Management Systems, and ISO 9001 Quality Management Systems, as certified by TÜV Nord.

Knauf Insulation

Knauf Rocksilk RainScreen Slab

Rocksilk® RainScreen Slab is a BBA certified Rock Mineral Wool slab designed for use as sheathing insulation in rainscreen façade systems both below and above 18m in height. It is non-combustible with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Application:Rainscreen facade insulation