Unilin

Unilin

37.5mm Unilin (Xtratherm) SR/TB Thermal Liner Phenolic Insulated Plasterboard

 Unilin (Xtratherm) SR/TB Thermal Liner Phenolic Insulated Plasterboard Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementA+ rating on BRE Green GuideBBA Certification No. 04/4130

Unilin

70mm Unilin Thin-R XT/CW T&G Partial Fill Cavity Wall (CORNERS) - per board

Thin-R XT/CW Cavity Wall Corner boards have engineered tongue and groove joints and preformed corners allowing for insulation continuity and minimisation of thermal bridging. For use in traditional masonry walls that build to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 08/4613 (Issued 5 August 2011)

Unilin

90mm Unilin (Xtratherm) UF PIR Board

Thin-R PIR is a closed-cell rigid high-performance foil faced Polyisocyanurate (PIR) insulation. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 08/4613 (Issued 5 August 2011)

Unilin

Unilin (Xtratherm) CavityTherm CT/PIR Cavity Wall Boards

Thin-R Plus CavityTherm is an innovative built-in insulation for traditional walls that achieves passive level U-Values as low as 0.12 W/m2K with excellent thermal bridging detailing in cavities less than 150mm wide. It has a unique engineered profile facing that directs any moisture that might penetrate the external wall down the protective facing and back onto the external leaf, giving added protection from wind-driven rain. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 10/4786

Unilin

Unilin (Xtratherm) Safe-R Phenolic Foam Board

Safe-R Phenolic Foam board is a superior performance phenolic insulation with an enhanced fire classification. It is faced with a low emissivity foil facings on both sides. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBBA - 10/4803A+ rating on BRE Green Guide

Unilin

Unilin (Xtratherm) Safe-R Phenolic Foam Underfloor Board SR/UF

Safe-R Under Floor SR/UF is a rigid phenolic insulation with low emissivity aluminium facings both sides and has a thermal conductivity as low as 0.020 W/mK, delivering excellent U-values in floors.The floor in any building is an area of considerable downward heat loss when not properly insulated. SR/UF will significantly improve the U-value of new and existing floors. SR/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBBA - 10/4803A+ rating on BRE Green Guide

Unilin

Unilin (Xtratherm) Thin-R FR/BGM Flat Roof

FR/BGM is faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the underside. FR/BGM is part of Xtratherm’s comprehensive range of high-performance flat roof boards providing total solutions for flat roof projects. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management OHSAS18001 - Occupational Health & Safety A rating on BRE Green Guide

Unilin

Unilin (Xtratherm) Thin-R FRMG Flat Roof Board

Xtratherm FR-MG is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the deck. The XT/FR MG insulation boards are secured by approved mechanical fixings or sufficiently bonded. The requirement for a separate water vapour control layer should be assessed in accordance with National Regulations. Certification: Xtratherm Flat Roof Board FR-MG is manufactured under ISO9001 assured quality system. FR-MG Board is CFC/HCFC free with zero ozone depletion potential and a Global Warming Potential less than 0.01. The fire rating when tested to BS 476 Part 3: 1968 External Fire Exposure Roof Test will be dependent upon waterproofing system specified.

Unilin

Unilin (Xtratherm) Thin-R PIR Board

Thin-R PIR is a closed-cell rigid high-performance foil faced Polyisocyanurate (PIR) insulation.  Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementA+ rating on BRE Green Guide

Unilin

Unilin (Xtratherm) Thin-R XT/CW T&G Partial Fill Cavity Wall Board

Thin-R XT/CW Cavity Wall boards have engineered tongue and groove joints and preformed corners allowing for insulation continuity and minimisation of thermal bridging. For use in traditional masonry walls that build to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 08/4613 (Issued 5 August 2011)

Unilin

Unilin (Xtratherm) XT/TL Thermal Liner Insulated PIR Plasterboard

Thin-R XT/TL Thermal Liner is Xtratherm PIR core with a composite kraft facing bonded to 12.5mm tapered edge plasterboard. The kraft facing on both sides incorporates a vapour control layer to help reduce the risk of condensation. It is designed to provide high levels of thermal insulation and drylining in one operation. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 04/4130

Unilin

Unilin (Xtratherm) Xtroliner Superior Performance PIR Board

  XtroLiner PIR board range of modified PIR offers excellent insulation performance with a thermal conductivity of 0.021 W/mK and a Euroclass C fire rating. It's faced with a robust PIR aluminium foil and available with engineered jointing to deliver improved Thermal Bridging detailing.  Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management A+ rating on BRE Green Guide BBA Certification No. 12/4956

Unilin

Unilin ECO360 MA Roof Bio-enhanced PIR Insulation

Bio-enhanced, superior-performance PIR insulation is suitable for sloped roofs (ventilated, hybrid or warm). Unilin ECO360 MA for roofs offers excellent insulation performance with a thermal conductivity of 0.020 W/mK. Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also delivering excellent thermal bridging details. This bio-enhanced insulation is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high-performance solution for roof insulation. ECO360 MA is halogen-free. The product packaging is bio-degradable and the overall packaging content has been reduced significantly.