Pro Clima Membranes

Pro Clima

Pro Clima Solitex Fronta Humida - Wall Lining Membrane (1.5m x 50m)

SOLITEX FRONTA HUMIDA is a wind, water and weatherproof vapour open breathable membrane that prevents any potential moisture build-up in the wall. The Solitex Fronta Humida is to be used on timber frames where woodfibre insulation is used externally behind a masonry/brick exterior wall. Due to the membrane’s slight diffusion resistance, the wood fibre insulation boards behind the masonry wall are protected from unsafe levels of moisture that occur within the ventilated cavity. This is necessary due to the low level of ventilation achieved behind a masonry wall.

Pro Clima

Pro Clima Solitex Adhero 3000 - Self Adhesive Vapour Permeable Membrane (1.5m X 30m)

Pro Clima Solitex Adhero is a self-adhesive, vapour permeable external breather membrane for use on masonry and timber structures. It can be quickly applied to immediately provide a wind and weathertight seal on buildings. Once applied, a costly construction tent is not required to protect the building from the elements during construction.

Pro Clima

Pro Clima Solitex Plus Connect - Vapour Permeable Membrane + Pre-applied Tape (1.5m x 50m 75m²)

SOLITEX PLUS CONNECT is the Next Generation of High-Performance vapour permeable Underlay. With an impressive range of characteristics such as highVapour Permeability, Extreme Watertightness, High Nail Tear Resistance and Thermostability, SOLITEX PLUS offers superior protection againstcondensation risk and extreme resistance against pelting rain. SOLITEX PLUS, from pro clima is a Diffusion-Open vapour permeable membrane. Certification: Meets with the durability requirements of EN 13984Passive Hosue Institute Certified Component - phABBA - 14/5155CE Mark

Pro Clima

Pro Clima Solitex Fronta Quattro - Open Facade Membrane (1.5m x 50m)

SOLITEX FRONTA QUATTRO permanently protects the insulation from wind and rain. For use with closed and open façades (open jointed cladding up to a gap width of 35 mm. Cladding width = at least 3 x gap width) in accordance with installation guidelines. Certification: CE Mark

Pro Clima

Pro Clima Solitex Fronta WA - Wall Lining Membrane

SOLITEX FRONTA WA is a monolithic fully windtight breather membrane specially designed to protect and enhance timber frame structures. It can be applied in the factory to the external face of pre-fabricated wall panels, or on site to timber frame wall assemblies. Certification: BBA - 14/5155CE Mark

Pro Clima

Pro Clima Solitex Plus - Vapour Permeable Membrane

SOLITEX PLUS is the Next Generation of High-Performance vapour permeable Underlay. With an impressive range of characteristics such as highVapour Permeability, Extreme Watertightness, High Nail Tear Resistance and Thermostability, SOLITEX PLUS offers superior protection againstcondensation risk and extreme resistance against pelting rain. SOLITEX PLUS, from pro clima is a Diffusion-Open vapour permeable membrane. Certification: BBA - 14/5155CE Mark

Pro Clima

Pro Clima Dasatop - 1.5m x 50m (75m²)

Pro Clima Dasatop - 1.5m x 50m (75m²)   Certifications: CE marked to DIN EN 13984.

Pro Clima

Pro Clima Constivap 2.3 Plus - 1.5m x 50m

Pro Clima Constivap 2.3 Plus vapour check and airtight membrane is designed and suited for use on internal roofs, walls, and ceilings. It offers excellent value for money and performance in situations where the levels of humidity and moisture in the building will not change significantly over time. Like many Pro Clima membranes, “Plus” means reinforced. There is a super-strong polypropylene mesh within Constivap 2.3 Plus. Certifications: Complies with CE requirements.

Pro Clima

Pro Clima DB+ - 1.35m x 50m

Pro Clima DB+ is designed to reduce interstitial condensation and provide a consistent, airtight internal seal. DB+ vapour check membrane allows vapour diffusion in summer to allow structural components in the build to dry out and it prevents as much vapour diffusion in winter months to ensure the build is protected from vapour penetration and moisture. This intelligent vapour check membrane from Pro Clima is manufactured from recycled paper that’s been made strong with a reinforcement layer of plasticiser-free PE film. DB+ is an environmentally friendly product that will be favoured by eco-builders and sustainable contractors. Certifications: - Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima DA - Membrane

Pro Clima DA vapour check and airtight membrane is designed and suited for use above rafters on sarking boards beneath insulation. Suited to all externally diffusion-permeable roof structures, Pro Clima DA vapour check and airtight membrane is waterproof and water resistant. This DA vapour check and airtight membrane will protect the structure during construction and it can be walked on too. Certifications: CE marked to DIN EN 13984.

Pro Clima

Pro Clima Intello Plus - Vapour Check Membrane

Pro Clima Intello Plus Intelligent airtight vapour check features humidity variable diffusion resistant. It gives maximum protection to thermal insulation where moisture entry may have occurred. This may be through leaks, damp installed building materials or diffusion through adjoining structural surfaces. Intello Plus features the world's best and most effective variable diffusion resistance. This ensures optimum protection for all fibrous insulating materials in all constructions, whether they are vapour diffusion-permeable or vapour diffusion resistance externally such as pitched roofs with bitumen sheeting or metal sheet roofing, flat roofs and walls with a diffusion resistant exterior cladding. Certification: Meets with the durability requirements of EN 13984Passive House Institute Certified Component - phABBA - 14/5155CE Mark