Insulation

Knauf Insulation

100mm Knauf DriTherm Cavity Slab 34

Earthwool DriTherm 34 Ultimate Cavity Slabs have a special additive to make the product water-repellent for thermal insulation in residential and non-residential masonry cavity external walls. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green Guide BBA - 95/3212 ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with

Rockwool

115mm Rockwool Hardrock Multi-Fix (DD) - 1200mm x 1000mm (CLEARANCE PRODUCT)

[[start desc]] ROCKWOOL HARDROCK Multi-Fix (DD) is manufactured from renewable volcanic stone which produces a non-combustible roofing insulation board. The boards are compatible with a range of flat roof systems, including single-ply, EPDM and liquid membranes, bitumen, and green roofs. HARDROCK® Multi-Fix (DD) boasts an extremely high acoustic performance – especially in conjunction with ROCKWOOL Acoustic Infills and ROCKWOOL Acoustic Membrane – providing a robust, fire resistant and acoustically sound solution to flat roof insulation. Tested to the highest European fire classification, HARDROCK® Multi-Fix (DD) meets the highest LPCB standards. It has also achieved European Reaction to Fire Classification of A1 non-combustibility. In the specification of fire-resistant insulation, it is crucial to consider characteristics such as combustibility and toxicity. HARDROCK® Multi-Fix (DD) provides an acoustically sound, non-combustible and non-toxic solution to flat roof insulation. [[end desc]] [[start key]]   [[end key]] [[start spec]] Thickness: 115mmWidth: 1000mmLength: 1200mPack Coverage: 2.88 m²Quantity per pack: 10Thermal Conductivity:  0.039 W/mKR-Value:  m²W/KFire Rating: A2, s1-d0 [[end spec]] [[start app]] Application: Certification: [[end app]]

Knauf Insulation

140mm Knauf FrameTherm® Slab 32 (Pack of 4)

FrameTherm Slabs 32 is a specialist product for timber frame construction. Earthwool FrameTherm slabs are used for ‘friction fitting’ between timber studs and rafters. Slabs are manufactured with a width of 570mm to suit studs spaced at 600mm centres. FrameTherm Slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Rockwool

50mm Rockwool Ductwrap

ROCKWOOL Ductwrap is a foil faced mat designed for ease of installation to circular ducts. In order to regulate temperature within heating, ventilation and air conditioning systems insulation must be applied. ROCKWOOL Ductwrap can provide the thermal insulation to these HVAC systems as well as cold water storage, feed and expansion tanks. This solution is acoustically absorbent and A1 non-combustible to deliver the highest level of fire performance. Certifications:- CE marked in accordance with BS EN 14303- Ductwrap has been authorised for use in LUL surface and sub-surface premises (LUL Ref: 315) when installed in accordance with the data sheet.- A1 non-combustible

Rockwool

50mm Rockwool ProRox WM 970 UK Wire Reinforced Mat (2x500mm x 3.1m)

ProRox WM 970 UK is a lightly bonded heavy-duty stone wool insulation mat stitched on galvanized wired mesh with galvanized wire. Stainless steel mesh and binding wire (SW) and/or reinforced aluminium foil (ALU) facing are also available in this range. Thermal Conductivity:  T (℃) 50 100 150 200 250 300 350 400 500 600 680 λ (W/mK) 0.040 0.045 0.053 0.061 0.070 0.081 0.093 0.105 0.132 0.167 0.197

Rockwool

50mm Rockwool ProRox WM 971 UK WRG Wire Reinforced Mat (2x500mm x 3.1m)

ProRox WM 971 UK WRG (water repellent) is a lightly bonded heavy-duty stone wool insulation mat stitched on galvanized wired mesh with galvanized wire. Supplied with a water repellent coating that meets the BP Engineering Standard 172. Stainless steel mesh and binding wire (SW) and/or reinforced aluminium foil (ALU) facing is also available in this range. Thermal Conductivity:  T (℃) 50 100 150 200 250 300 350 400 500 600 680 λ (W/mK) 0.040 0.045 0.053 0.061 0.070 0.081 0.093 0.105 0.132 0.167 0.197

Rockwool

50mm Rockwool Wire Reinforced Fire Barrier 3.7m x 1m

Rockwool Fire Barrier Roll Plain faced is comprised of stone wool and has a galvanised wire mesh that is stitched to one side. Fire Barrier systems have been developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings and improve sound reduction.Rockwool Fire Barrier Roll Foil faced 2 & 1 Sides is comprised of stone wool and has a galvanised wire mesh that is stitched to one side. The product is foil faced on both side. Fire Barrier systems have been developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings and improve sound reduction.

Rockwool

60mm Rockwool NyRock Rainscreen 032 - 1200mm x 600mm

NyRock Rainscreen is a insulation product, that in addition to thermal comfort, provides an independently-tested acoustic benefit.

IndiNature

IndiNature IndiLoft Hemp Flexibatt Loft Insulation

Light, healthy, soft to touch, carbon negative and vapour breathable loft insulation batts made with natural fibres including UK hemp. IndiLoft® can be friction fit between joists and easy to lay in lofts. Healthy and soft to the touch for installers. Very large carbon savings - net negative embodied carbon. Building occupants will benefit from the exceptional thermal and moisture buffering properties of this sustainable material. It has the added property of low-density heat storage, which means indoor temperatures stay warm in winter and cool in summer. Durability tested.

IndiNature

IndiNature IndiTherm Hemp Flexibatt Insulation

A flexible thermal insulation ‘batt’ made from UK crops. IndiTherm® can be friction fit between structural framing or against masonry - with excellent rigidity to resist slumping. Healthy and soft to the touch for installers. Very large carbon savings - net negative embodied carbon. Building occupants will benefit from the exceptional thermal and moisture buffering properties of this sustainable material. It has the added property of low-density heat storage, which means indoor temperatures stay warm in winter and cool in summer. Durability tested.

Knauf Insulation

Knauf Acoustic Roll

Designed specifically for sound insulation of residential building elements such as Robust Detail walls and floors, separating floors and walls, internal floors and walls as well as commercial metal stud partitions where compliance with acoustic regulations is required. Knauf Acoustic Rolls are 1200mm wide and ready-cut to produce four, 600mm wide rolls (double wound) and manufactured to a minimum density of 10Kg/m3. Application: - Friction fit between  joists and studs at 400mm and 600mm- Separating Walls and floors- Internal walls and floors- Timber and metal stud partitions Certification: EUROCLASS A1 to BS EN 13501-1ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf DriTherm Cavity Slab 32

For thermal insulation in residential and non-residential masonry cavity external walls, Earthwool DriTherm 32 Ultimate Cavity Slabs have a special additive to make the product water repellent. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green GuideBBA - 95/3212ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance with

Knauf Insulation

Knauf DriTherm Cavity Slab 37

For thermal insulation in residential and non-residential masonry cavity external walls, Earthwool DriTherm Cavity Slabs have a special additive to make the product water repellent. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs. Certification: A+ rating on BRE Green Guide BBA - 95/3212 ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with

Knauf Insulation

Knauf FrameTherm® Roll 32

  FrameTherm Roll 32 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 35

FrameTherm Roll 35 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 3x380mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 40

FrameTherm Roll 40 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. Earthwool FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 40 (Combi-Cut)

Knauf Loft Roll 40 provides a superior performance with a thermal conductivity of 0.040 W/mK. Available with partially cut perforations, Combi-cut has the flexibility to be used between joists at either 400mm or 600mm centres or used unsplit as a full-width roll. Knauf Loft Roll 40 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria Application: Knauf Loft Roll 40 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 44 (Combi-Cut)

Knauf Loft Roll 44 is available in a range of thicknesses with a thermal conductivity of 0.044 W/mK. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres, or used unsplit as a full-width roll. Ready-cut products are fully cut and are designed to be used between joists at 600mm centres. Knauf Loft Roll 44 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool Loft Roll 44 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Omnifit Slab 35 (600mm wide)

Knauf OmniFit Slab 35 is an alternative to existing flexible slabs and has a high level of thermal performance. OmniFit Slab is available in both 600mm and 400mm wide options to suit use between timber or metal studs at either 600mm or 400mm centres. OmniFit Slab is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool OmniFit Slab is typically used for the thermal and acoustic insulation of a wide variety of constructions such as timber and metal stud partitions, timber frame walls, between rafters and timber floors. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with A+ rating on BRE Green Guide [[end app]]

Knauf Insulation

Knauf Rocksilk Flexible Slab

Rocksilk Flexible Slab is a Rock Mineral Wool slab, designed for use in multiple thermal and acoustic applications as well as the fire protection of a loft conversion floor.It is non-combustible with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Application:- Rocksilk® Flexible Slab is typically used for the thermal and acoustic insulation of a wide variety of constructions such as timber and metal stud partitions, timber frame walls and suspended timber floors. Rocksilk® Flexible Slab has been tested to provide 60 minutes fire protection when a loft is upgraded into habitable accommodation. Certification:- Rocksilk® Flexible Slab is manufactured in accordance with BS EN 13162, ISO 50001 Energy Management Systems, ISO 14001 Environmental Management Systems, and ISO 9001 Quality Management Systems, as certified by TÜV Nord.

Knauf Insulation

Knauf Rocksilk RainScreen Slab

Rocksilk® RainScreen Slab is a BBA certified Rock Mineral Wool slab designed for use as sheathing insulation in rainscreen façade systems both below and above 18m in height. It is non-combustible with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Application:Rainscreen facade insulation

Rockwool

Rockwool Ablative Coated Batt

ROCKWOOL Ablative Coated Batt is a mineral wool insulation product, pre-coated on both sides with a high performance ablative coating. The Ablative Coated Batt is tested to provide up to 4 hours fire resistance whilst also providing an excellent acoustic performance and importantly, maintaining air tightness and reducing unwanted heat losses. Ablative Coated Batts are not intended for use as load-bearing seals. Certifications: BS EN 1366-3: 2009 and the dedicated fire resistance standard for linear joint sealsBS EN 1366-4:2006Ablative Coated Batt has been classified in accordance with BS EN 13501-2Third party accreditation through CertifireCE Marked to EAD 350454-00-1104 - ETA 20/1128

Rockwool

Rockwool Beamclad

ROCKWOOL BEAMCLAD provides fire protection solutions for structural elements.Structural steel and cellular sections of a build require the most robust, durable fire resistant insulation to combat the wide variety of site, mixed trade and climatic conditions. The ROCKWOOL BEAMCLAD System provides a complete ‘tool-box’ of fire protection options, catering for the diversity of modern steel construction. Certification: Reaction to fire Euroclass A1 Fire resistance Tested to ENV 13381-4:2002 and EN 13381-4:2013 to provide up to 4 hours fire protection

Rockwool

Rockwool FLEXI Slab

FLEXI® is a multi-use, dual purpose thermal and acoustic insulationproduct with a unique flexible edge along one side. The patented flexible edge ensures a perfect fit is maintained between the product and its supporting framework for easy installation and optimum effectiveness. Certification: ISO14001 - Environmental Management,EN 13162 - Manufactured in accordance with.A+ rating on BRE Green Guide

Rockwool

Rockwool Full Fill Cavity Batts

ROCKWOOL Cavity Batts provide thermal protection for external masonry walls, and thermal and sound protection within masonry party walls, between dwellings. The batts are quick and easy to accurately cut, and provide a great fit; reducing installation time, avoiding gaps and cold spots, and maximising long term performance. ROCKWOOL Cavity Batts are also used in masonry party walls to prevent the thermal bypass effect, and so achieve a zero U-value, while also providing the required sound protection and fire resistance. Certification: ISO14001 - Environmental Management.EN 13162 - Manufactured in accordance with.A+ rating on BRE Green Guide

Rockwool

Rockwool Hardrock Multi-Fix (DD)

ROCKWOOL HARDROCK Multi-Fix (DD) is manufactured from renewable volcanic stone which produces a non-combustible roofing insulation board. The boards are compatible with a range of flat roof systems, including single-ply, EPDM and liquid membranes, bitumen, and green roofs. HARDROCK® Multi-Fix (DD) boasts an extremely high acoustic performance – especially in conjunction with ROCKWOOL Acoustic Infills and ROCKWOOL Acoustic Membrane – providing a robust, fire resistant and acoustically sound solution to flat roof insulation. Tested to the highest European fire classification, HARDROCK® Multi-Fix (DD) meets the highest LPCB standards. It has also achieved European Reaction to Fire Classification of A1 non-combustibility. In the specification of fire-resistant insulation, it is crucial to consider characteristics such as combustibility and toxicity. HARDROCK® Multi-Fix (DD) provides an acoustically sound, non-combustible and non-toxic solution to flat roof insulation.

Rockwool

Rockwool ProRox WM 960 Wire Reinforced Duct Wrap

ProRox WM 960 is a lightly bonded heavy duty stone wool mat stitched on galvanised wired mesh with galvanised wire. The wired mat is especially suitable for industrial applications such as high-pressure steam pipes, reactors, furnaces, etc. where high demands are made on the temperature resistance of the insulation. Conformity: ProRox WM 960 UK Wired Mats fully comply with the requirements as set by internationally recognized standards like EN14303, CINI 2.2.02, PMUC and ASTM C592 Type I, II and III.VDI 2055, AGI Q 132 Designation code: 10.01.03.66.10

Rockwool

Rockwool Rainscreen Duo

ROCKWOOL RAINSCREEN DUO SLAB® is a stone wool insulation product specifically developed for use within ventilated cladding systems, as well as sealed systems such as curtain walling. Manufactured using Dual Density technology, the outer surface of each slab features a distinctly higher density than the underside. This provides a firm and robust surface for the application of fixings, while the resilient underside can accommodate unevenness in the substrate. Once installed, the higher density outer surface works in combination with a factory-applied water repelling agent to give improved resistance to rain ingress during construction. The product can be easily fitted around brackets and other awkward details, and when tightly butted, adjacent slabs effectively ‘knit’ together to provide a continuous insulating layer, reducing heat losses that would otherwise be caused by gaps.

Rockwool

Rockwool RW3

ROCKWOOL RW3 is a robust insulation solution for a range of general building projects as well as specialist specifications such as commercial, leisure, industrial and more. The insulation provides excellent acoustic, thermal and fire performance  Certification: ISO14001 - Environmental Management. EN 13162:2012 - Thermal insulation products for buildings. Factory made mineral wool (MW) products. A+ rating on BRE Green Guide CE - EN 13162

Rockwool

Rockwool RW5

ROCKWOOL RW5 is a robust insulation solution for a range of general building projects as well as specialist specifications such as commercial, leisure, industrial and more. The insulation provides excellent acoustic, thermal and fire performance. Certification: ISO14001 - Environmental Management. EN 13162:2012 - Thermal insulation products for buildings. Factory made mineral wool (MW) products. A+ rating on BRE Green Guide CE - EN 13162

Rockwool

Rockwool RWA45 Acoustic Thermal Insulation Slabs

ROCKWOOL RWA45 Slabs can be applied to an array of general building applications for acoustic, thermal and fire protection of partition walls, ceilings, floors and roofs. Certification: ISO14001 - Environmental Management.EN 13162:2012 - Thermal insulation products for buildings. Factory made mineral wool (MW) products.A+ rating on BRE Green GuideCE - EN 13162

Rockwool

Rockwool TCB Cavity Barrier

Rockwool TCB Cavity Barriers have been developed to exceed minimum buildingregulation requirements for fire resistance within concealed wallcavities. Tested and assessed to BS476: Part 20, they provide up to 60 minutes of fire resistance (integrity and insulation). Certification: Euroclass A1 fire rating / Tested and assessed for up to 60 minutes fire resistance (integrity and insulation) in accordance with BS 476: Part 20.  ISO14001 - Environmental Management. EN 13162 - Manufactured in accordance with. A+ rating on BRE Green Guide

Thermafleece

Thermafleece CosyWool Sheep Wool

Thermafleece CosyWool Roll is a versatile insulation rich in British sheep’s wool and is the ideal choice if you are looking for all round performance and value for money. Research shows that using 75% wool in combination with recycled fibres outperforms alternative products with a higher percentage of wool. Our wool rich blend ensures you get the full benefit of sheep’s wool with enhanced performance, durability and sustainability.

Thermafleece

Thermafleece CosyWool Slab

Thermafleece CosyWool slab is a versatile insulation rich in British sheep's wool. A great choice for insulating walls and roofs. Research shows that using 75% wool in combination with recycled fibres outperforms alternative products with a higher percentage of wool. Our wool rich blend ensures you get the full benefit of sheep’s wool with enhanced performance, breathability, durability and sustainability. Sold per packs

Thermafleece

Thermafleece NatraHemp Slab

Hemp is a fast-growing, low-impact plant crop that produces fine fibres suitable for insulation. Thermafleece NatraHemp is a medium density insulation rich in home-grown hemp fibres and is a safe, efficient and durable alternative when plant fibre is the preferred choice.

Thermafleece

Thermafleece UltraWool Slab

Thermafleece UltraWool is a high density highly efficient insulation rich in British sheep’s wool and is the ideal choice if you are looking for maximum thermal performance when space is at a premium. What’s more, with a density of 31 kg/m3 Thermafleece UltraWool helps provide exceptional acoustic insulation performance in wall, floor and roof systems.

Ultimate Insulation

Ultimate Insulation Foam Glass Aggregate/Gravel

Ultimate Insulation foam glass is a highly heat-insulating, ecological alternative for insulation to building floors from 99% recycled glass. Certification DIN 4102 (DIN EN 13501-1)DIBT Approval Z – 23.34 – 1579Construction material class A1 and suitable as fire extinguishing agent.